Sensors, actuators, motors, and other devices use A-coded connections, one of the most widely used M12 connection types. They are often employed for several industrial automation applications.
A specific configuration of the connector’s pins is indicated by the “A” code, which stands for pin assignment. There are several types of M12 connectors, including 2-pin, 3-pin, 4-pin, 5-pin, 6-pin, 8-pin, 12-pin, and 17-pin versions. Extruded cables, transom connectors, dividers, and field-wireable connectors are all examples of M12 A-coded connections.
- M12 A-Coded Connector with over mold.
M12 that has excessive mold “A connection that has been injection-molded with a cable” is what is meant by the phrase “coded connector.” The connection between the cable and the connector might be stronger and more dependable as a result. Other connection types, such as PVC, PUR, moving, spring, and armor cables, can be used, and the cable’s length can be adjusted to meet the client’s needs.
Pre-wired M12 A-coded cables have their conductors already attached to the contacts of the M12 A-coded connector. It can save time and effort throughout the assembly process. M12 A-coded cables can have any number of pin configurations, including 2, 3, 4, 5, 6, 8, 12, and 17. They can also be straight or right angle, insulated or unshielded, and male or female.
- A Field Wireable M12 Connector and an A-Coded M12 Connector
The user in an A-code may connect and install M12 field wireable connections on-site as opposed to having them pre-wired at the factory. It makes it a simple choice for small-mount applications requiring a faster delivery time. The three available techniques for terminating M12 A-coded field wireable connections are soldering, screwing, and crimping. It is also available in two forms, polyamide 66 and zinc (PA66). While PA66 is a kind of plastic prized for its great strength and durability, zinc is a metal with a reputation for corrosion resistance. One can also make the connection in a straight or right-angle configuration.
- A-Coded M12 Flange Connector
With M12 A-coded bulkhead connections, sensors, actuators, and other electrical devices are typically surface-mounted. They may be set up from either the front or the back of the bulkhead, depending on the installation requirements and intended use.
Solder type, PCB mount, and SMD (surface mount device) type A-code M12 panel mount connections are among the various varieties offered. Solder-type connections are linked using soldering techniques and are frequently utilized for permanent installations.
Electrical equipment frequently uses PCB mount connectors because they are made to be installed directly into a printed circuit board. SMD connectors, which are intended for use with high-density electronic circuits, are employed.
- Divider M12 A-Coded
Using M12 splitters, a single A-coded M12 connection may be split into several M12 connections. They can be panel-mounted or supplied with wires and have many forms, including T, Y, and L shapes. We can modify the internal wiring of the M12 splitter to meet the demands of a given application. The signal is often divided into three distinct connectors using the L-shaped M12 splitter and into two independent connections using the T-shaped and Y-shaped M12 separators.
Conclusion
In addition to supplying end users with sensors, actuators, automatic control systems, automation equipment, etc., they are a top-tier M12 connector supplier in China, providing high-quality products to distributors globally. Thanks to their broad selection of product categories, product quality comparable to that of major international brands, quick delivery, virtually flawless compatibility, and incredibly expensive performance, their products have won the consumer’s trust in more than 80 countries worldwide. Working with the Shine Industry has further advantages as well.
